TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 55 of 396
TB 9-2320-302-13&P-2
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
0009 00-9
6
Before
Door and
Windshield
Ballistic
Glass
a. Open door and enter cab. Close door
using grab handle. Make sure door
closes without binding (WP 0004 00).
Door binds.
b.Make sure door ballistic glass can
open, close, and securely lock.
Door ballistic glass will not close or
lock.
c.Inspect interior surface of door ballis-
tic glass and windshield ballistic glass
for cracks, scratches, or pitting.
Cracks, scratches, or pitting on the inte-
rior surface of the door ballistic glass or
windshield ballistic glass.
d.If dirty, clean ballistic glass (WP 0010
00).
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
Item
No.
Interval
Location
Procedure
Not Fully Mission
Capable If:
Item To
Check/
Service
440-083
DOOR BALLISTIC GLASS
WINDSHIELD BALLISTIC
GLASS
Back to Top
