TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 58 of 396
TB 9-2320-302-13&P-2
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
0009 00-12
9
(Con’t)
Before
Side Armor
(Right Side)
e.Inspect wheel well blast deflector for
damage, loose, or missing mounting
hardware.
Any wheel well blast deflector is dam-
aged or mounting hardware is loose or
missing.
f. Inspect wheel well blast deflector
frame for areas of rust or corrosion.
Any corrosion where area is unsound
and small pin holes are present, or a
rusted through condition is present.
g.Inspect right firewall armor panel for
damage, loose, or missing mounting
hardware.
Any armor panel assembly is damaged
or mounting hardware is loose or miss-
ing.
h.Inspect right firewall armor frames for
areas of rust or corrosion.
Any corrosion where area is unsound
and small pin holes are present, or a
rusted through condition is present.
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
Item
No.
Interval
Location
Procedure
Not Fully Mission
Capable If:
Item To
Check/
Service
440-009
DOOR BALLISTIC GLASS
A-PILLAR
ARMOR
RIGHT FIREWALL
ARMOR (HIDDEN)
DOOR ARMOR
B-PILLAR
ARMOR
WHEEL WELL
BLAST DEFLECTORS
Back to Top
