TB-9-2350-368-25
M113A2/M113A3/M548Al/M548A3 FAMILY OF VEHICLES INCLUDING OPPOSING FORCES SURROGATE VEHICLE (OSV)
FABRICATION AND OPERATION OF POWERPLANT TEST STAND
FEBRUARY 2003
TB-9-2350-368-25 - Page 37 of 120
TB 9-2350-368-25
2-23
SECTION III. FUEL SYSTEM
2-3.
FUEL SYSTEM.
a. Fuel Tank
The fuel tank and components can be fabricated from stock or purchased locally. It can be metal or fiberglass
composition. It should hold at least 10 gallons of fuel. Any similar fuel tank may be used as long as it can be
mounted in the area below the forward framework. A fabricated tank and system can be used, however, local
stores sell complete fiberglass or aluminum fuel tanks that will work as well and will save time and
material.
b. Fuel Tank Supports
Fuel tank supports shall be fabricated to hold the fabricated or purchased tank securely to the frame. There
should be at least one fuel tank strap. The stand will be moved by forklift and the fuel tank must be secure
during transport.
c. Fuel Line Adapter
Bill Of Materials
Item
Nomenclature
Part Number
NSN
Qty
Hardware/Components
1
Coupling Half, Quick Disconnect
10942651
2
2
Washer, Flat
8906-055
1
3
Pipe, Bushing
WW-P-471-BDQBDC
1
4
Coupling Half, Quick Disconnect
8906-061
1
5
Coupling Half, Quick Disconnect
12297003-1
1
1. Assemble hose assembly (1) and coupling half (2). See Figure 2-15.
2. Assemble hose assembly (3), pipe bushing (4), and coupling half (5). See Figure 2-15.
Back to Top
