TB-9-2510-251-13

TECHNICAL BULLETIN

OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING

AUGUST 2007

TB-9-2510-251-13 - Page 171 of 624

2-155

TB 9-2510-251-13

2-2.1

Installation of Air Conditioning Kit to M998 and M998A1; M1037; M1097 and M1097A1

Two-Door with O’Gara Hess Add-on-Armor (Cont’d).

b. Install Evaporator and Condenser (Cont’d)

18

20

19

21

21

29

27

28

24

22

22

23

25

26

26

23

30

30

31

Figure 2-231. Evaporator Unit

Figure 2-232. Rear Armor

(19)

Position evaporator unit (18) in lower evaporator bracket (19) and loosely secure to bottom

holes with two bolts (20).

(20)

Swing evaporator unit (18) into upright position and loosely secure to remaining upper and

lower bracket holes with six bolts (21).

(21)

Remove existing bolts from Row 6 and Row 7.

(22)

From rear of armor, install two bolts (22), washers (23), and lower condenser bracket (24) in

Row 6 and Row 7, and secure with washers (25) and locknuts (26).

(23)

Position condenser base support bracket (27) on lower condenser bracket (24) and loosely

secure to two center holes in lower condenser bracket and base support bracket with two

bolts (28), washers (29), washers (30), and locknuts (31).