TB-9-2510-251-13

TECHNICAL BULLETIN

OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING

AUGUST 2007

TB-9-2510-251-13 - Page 176 of 624

2-160

TB 9-2510-251-13

#6 HOSE

Figure 2-239.

Refrigerant Hose Routing (#6)

2-2.1

Installation of Air Conditioning Kit to M998 and M998A1; M1037; M1097 and M1097A1

Two-Door with O’Gara Hess Add-on-Armor (Cont’d).

d. Install Refrigerant Hoses (Cont’d)

(11) Evaporator to drier, #6 hose:

a. Route

#6 hose through rear grommet (inside vehicle), under floor and up through

forward grommet (outside vehicle).

Leave approximately two feet of hose inside

vehicle.

Pull remaining hose outside.

(12)

Drier to condenser,

#6 hose:

a. Route remaining length of #6 hose from inlet (male) fitting on drier up back wall of cab.

Secure to #8 hose to condenser.

#6 HOSE