TB-9-2510-251-13
TECHNICAL BULLETIN
OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING
AUGUST 2007
TB-9-2510-251-13 - Page 90 of 624
2-74
TB 9-2510-251-13
1
1
1
REAR SIDE
ARMOR PLATE
REAR CENTER
ARMOR PLATE
REAR SIDE
ARMOR PLATE
2-1.2
Installation of Air Conditioning Kit to M1097A2 with GSIE Add-on-Armor (Cont’d).
g. Air Distribution Ducting (Cont’d)
(3)
Two-door vehicles only:
a. Cut off male end of 90° elbows so the elbows fit over the square outlets on the plastic
plenum.
b. Attach 90° elbows to plenum.
c.
When air delivery is acceptable, apply a generous quantity of PVC cement
(item 3, Appendix D) to the mating surfaces and secure with screws.
Figure 2-110.
Rear Side Armor Plates
Figure 2-111.
Rear Center Armor Plate
h. Prepare System for Use
(1)
Using foam (1) and duct tape, seal as many cab air leaks as possible.
(2)
Purge and charge air conditioning system (para 4-14).
Back to Top
