TB-9-2510-251-13
TECHNICAL BULLETIN
OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING
AUGUST 2007
TB-9-2510-251-13 - Page 94 of 624
2-78
TB 9-2510-251-13
9
11
12
8
10
(7)
Position compressor (8) on mounting bracket (9) and secure with bolt (10), washer (11),
and locknut (12).
Tighten bolt (10) to 18 ft-lbs.
Do not overtighten.
2-1.3
Installation of Air Conditioning Kit to M1025 and M1025A1 with GSIE Add-on-Armor
(Cont’d).
a. Install Compressor (Cont’d)
5
7
6
5
Figure 2-114.
Air Intake Duct Support Bracket Removal
Figure 2-115.
Compressor Installation
(5)
Remove bolts/studs (5), attach air intake duct support bracket (6) and fuel line clamps to
engine.
(6)
Disconnect fuel return hose from fuel return line “T” (7).
Back to Top
