TB-9-2510-251-13

TECHNICAL BULLETIN

OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING

AUGUST 2007

TB-9-2510-251-13 - Page 102 of 624

2-86

TB 9-2510-251-13

23

24

23

26

25

27

28

23

30

29

2-1.3

Installation of Air Conditioning Kit to M1025 and M1025A1 with GSIE Add-on-Armor

(Cont’d).

b. Install Evaporator and Condenser (Cont’d)

Figure 2-129.

Band Clamps

Figure 2-128.

Evaporator Side Brackets

(17)

Remove two top center bolts from rear center armor plate and rear side armor plate.

(18)

Loosely attach evaporator side brackets (23) to evaporator unit with original hardware.

NOTE

For ease of installation, pre-bend ends of band clamps prior to installing on

receiver/drier bracket.

(19)

Install bolts (24) flat washers (25), and oversize washers (26) through evaporator side

brackets (23), armor plates, and receiver/drier bracket, and secure with flat washers (27)

and locknuts (28).

Tighten snug.

(20)

Install band clamps (29) on receiver drier bracket (30).