TB-9-2510-251-13
TECHNICAL BULLETIN
OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING
AUGUST 2007
TB-9-2510-251-13 - Page 98 of 624
2-82
TB 9-2510-251-13
2-1.3
Installation of Air Conditioning Kit to M1025 and M1025A1 with GSIE Add-on-Armor
(Cont’d).
a. Install Compressor (Cont’d)
(22)
Tighten all compressor mounting bolts.
Torque to 35 ft-lbs.
Do not overtighten.
Figure 2-120.
Compressor Adjustment
30
28
30
29
29
(23)
Check clearance between compressor belt and lower radiator hose.
If clearance is less
than 3/8 inch, remove bolts (28) attaching lower radiator pipe to vehicle frame.
Install two
or four spacers (29) and lockwashers (30) between radiator pipe bracket and frame bracket
to shift pipe rearward away from belt.
Reinstall bolts attaching lower radiator pipe to vehicle
frame.
(24)
Reinstall alternator belts and adjust belt tension.
(25)
Reinstall air intake duct after connecting refrigerant hoses to compressor.
Back to Top
