TB-9-2510-251-13

TECHNICAL BULLETIN

OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING

AUGUST 2007

TB-9-2510-251-13 - Page 109 of 624

2-93

TB 9-2510-251-13

Figure 2-141.

Hose Routing

(1)

Trim grommets (2) to achieve a snug fit around hoses and wire harnesses.

(2)

Install one grommet (1) in rear most hole from top of hatch.

(3)

Install two grommets (2) in remaining holes in hatch from underside of hatch.

(4)

From top of hatch, push six-pin male connector from condenser wire harness through

grommet in rear most hole from top of hatch.

(5)

Pull approximately eight inches of wire harness through grommet.

2-1.3

Installation of Air Conditioning Kit to M1025 and M1025A1 with GSIE Add-on-Armor

(Cont’d).

d. Install Refrigerant Hoses (Cont’d)

1

HIDDEN

2

2