TB-9-2510-251-24
TECHNICAL BULLETIN
INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)
JULY 2005
TB-9-2510-251-24 - Page 64 of 212
TB 9-2510-251-24
1-54/1-55 (blank)
2)
Install lower capping ring as follows (see figure 1-26).
a.
Position and align lower capping ring assembly (4) onto windshield frame and transfer five hole locations
to windshield frame.
b.
Drill five 25/64-inch holes in windshield frame.
Install two long upset fasteners (2) to the outer edges of
the windshield frame.
Install three short upset fasteners (3) to the inner windshield frame per figure 1-26.
c.
Apply sealing compound to capscrews (1).
d.
Install lower capping ring assembly (4) onto windshield frame and secure with five capscrews (1).
e.
Torque capscrews (1) to 6 lb ft (8 N
•
m).
2
3
WINDSHIELD
FRAME (REF)
2
3
1
TRANSFER
AND DRILL FIVE
25/64-INCH HOLES
1
1
1
1
4
Figure 1-26.
Lower Capping Ring Installation (2 and 4 Door)
Back to Top
