TB-9-2510-251-24

TECHNICAL BULLETIN

INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)

JULY 2005
TB-9-2510-251-24

  TB-9-2510-251-24 - Page 54 of 212

TB 9-2510-251-24
1-44
1-11.
ANTENNA MOUNT INSTALLATION
(4 DOOR ONLY)
TOOLS:
General mechanics tool kit:
MATERIAL/PARTS:
FIGURE
ITEM
PART NO.
NOMENCLATURE
QTY
1-22
1
6430655-01M1
BRACKET, REAR ANTENNA, RIGHT EXTERIOR
2
2
4397064-005
NUT, LOCKING, 0.375-16
8
3
4397005-014
WASHER, FLAT, 0.375 IN.
8
4
6430656-01M1
BRACKET, REAR ANTENNA
2
5
4397000-060
CAPSCREW, HEX HEAD, 0.375-16 X 1.00 IN.
4
6
4397005-010
WASHER, FLAT, 0.250 IN.
16
7
4397000-006
CAPSCREW, HEX HEAD, 0.250-20 X 0.75 IN.
8
8
4397000-060
CAPSCREW, HEX HEAD, 0.375-16 X 1.00 IN.
8
9
4397005-014
WASHER, FLAT, 0.375 IN.
16
10
4397064-005
NUT, LOCKING, 0.375-16
8
11
4397064-001
NUT, LOCKING, 0.250-20
8
12
6430654-01M1
BRACE, ANTENNA BRACKETS
2
a. Installation
1)
Install antenna mount (see figure 1-22).
a.
Install interior antenna mount bracket (4) and exterior antenna mount bracket (1) on C-partition support
mount with four capscrews (8), eight washers (9), and four locknuts (10).
Torque locknuts (10) to
37 lb ft (50 N
•
m).
b.
Install center support brace (12) on interior antenna mount bracket (4) and exterior antenna mount bracket
(1) with four capscrews (7), eight washers (6), and four locknuts (11).
Torque locknuts (11) to 10 lb ft
(14 N
•
m).
c.
Secure interior antenna mount bracket (4) to exterior antenna mount bracket (1) with two capscrews (5),
four washers (3), and two locknuts (2).
Torque locknuts (2) to 37 lb ft (50 N
•
m).
d.
Repeat steps a. through c. for opposite side of vehicle.


Back to Top