TB-9-2510-251-24
TECHNICAL BULLETIN
INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)
JULY 2005
TB-9-2510-251-24 - Page 47 of 212
TB 9-2510-251-24
1-37
2)
Install B-partition gap strip as follows (see figure 1-17).
a.
Install upper B-partition gap strip (6) onto right B-partition assembly (2) securing with four capscrews
(1), washers (5) and locking nuts (4).
b.
Install lower B-partition gap strip (3) onto right B-partition assembly (2) securing with two capscrews
(1), washers (5) and locking nuts (4).
c.
Torque capscrews (1) to 37 lb ft (50 N
•
m).
5
4
6
3
1
5
4
1
2
Figure 1-17.
B-Partition Gap Strip Installation (2 Door Only)
Back to Top
