TB-9-2510-251-24
TECHNICAL BULLETIN
INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)
JULY 2005
TB-9-2510-251-24 - Page 46 of 212
TB 9-2510-251-24
1-36
a. Installation
1)
Install B-partition mount bracket as follows (see figure 1-16).
a.
Install left B-partition mount bracket (3) onto lower B-pillar securing with four capscrews (2), washers
(1), washers (4) and locking nuts (5).
Do not tighten capscrews (2) at this point.
b.
Repeat on opposite side of vehicle.
1
2
3
5
6
LOWER
B-PILLAR
(REF)
4
Figure 1-16.
B-Partition Mount Bracket Installation (2 Door Only)
Back to Top
