TB-9-2510-251-24
TECHNICAL BULLETIN
INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)
JULY 2005
TB-9-2510-251-24 - Page 94 of 212
TB 9-2510-251-24
2)
Remove lower B-partition center mount bracket as follows (see figure 2-19):
a.
Remove two capscrews (1), washers (3) and locking nuts (4) securing B-partition center mount bracket (2) to lower
B-partition gap strip and left and right B-partition assemblies.
Discard locking nuts (4).
b.
Remove two capscrews (6) and washers (5) securing center mount bracket (2) to vehicle tunnel.
Remove center
mount bracket (2).
1
VEHICLE
TUNNEL
(REF)
LOWER
B-PARTITION
GAP STRIP
(REF)
LEFT
B-PARTITION
ASSEMBLY
(REF)
RIGHT
B-PARTITION
ASSEMBLY
(REF)
2
3
4
5
6
Figure 2-19.
B-Partition Center Mount Removal (2 Door Only)
2-22
Back to Top
