TB-9-2510-251-24
TECHNICAL BULLETIN
INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)
JULY 2005
TB-9-2510-251-24 - Page 87 of 212
TB 9-2510-251-24
2-15
2-6.
C - PARTITION REMOVAL (4 DOOR ONLY)
a. Removal
1.
Remove rear seat backing plates as follows (see figure 2-12).
a.
Remove two capscrews (5), three capscrews (8), and three washers (7) securing rear seat backing plate (6)
to vehicle. Remove rear seat backing plate (6).
b.
Remove two capscrews (1) and locknuts (4) securing seat backing support (2).
Discard locknuts (4).
Remove seat backing support (2).
c.
Repeat steps a. and b. for opposite side of vehicle.
2
4
6
7
8
5
3
1
Figure 2-12.
Rear Seat Backing Plates Removal (4 Door Only)
Back to Top
