TB-9-2510-251-24
TECHNICAL BULLETIN
INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)
JULY 2005
TB-9-2510-251-24 - Page 89 of 212
TB 9-2510-251-24
2-17
3.
Remove Upper C-partition as follows (see figure 2-14).
a.
Remove two capscrews (11), six washers (12), and two locknuts (13).
Discard locknuts (13).
Repeat step
on opposite of vehicle.
b.
Remove eight capscrews (9), washers (14) and two mount bracket isolators (7). Repeat step on opposite
of vehicle
c.
Remove eight capscrews (4) and locknuts (5).
Remove upper C-partition gap strip (3).
d.
Remove six capscrews (15) and locknuts (16).
Remove lower C-partition gap strip (6).
e.
Remove left C-partition (1) from vehicle. Remove right C-partition (2) from vehicle.
4
15
2
1
16
6
3
5
VEHICLE
TUNNEL
(REF)
7
12
12
13
9
7
LEFT REAR
WHEEL
HOUSE
(REF)
C-PARTITION
SUPPORT
MOUNT
(REF)
11
12
7
14
Figure 2-14.
Upper C-Partition Removal (4 Door Only)
Back to Top
