TB-9-2510-251-24
TECHNICAL BULLETIN
INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)
JULY 2005
TB-9-2510-251-24 - Page 88 of 212
TB 9-2510-251-24
2.
Remove C-partition isolator brackets as follows (see figure 2-13).
a.
Remove two capscrews (16), four washers (15), two isolator mount bushings (7), and two locknuts (18).
Discard locknuts (18) per detail A.
Remove four capscrews (20), shim (22), and right isolator bracket
(14).
b.
Remove two capscrews (16), four washers (15), two isolator mount bushings (7), and two locknuts (18).
Discard locknuts (18) per detail B.
Remove four capscrews (20), shim (22), and left isolator bracket (14).
SEE DETAIL A
SEE DETAIL B
1
DETAIL A
2
DETAIL B
2 (REF)
16
15
7
7
15
18
14
18
1 (REF)
15
7
7
15
16
14
22
20
20
VEHICLE
BODY (REF)
22
MATCH DRILL 13/64-INCH
(TWO PLACES FROM OUTSIDE)
19
VEHICLE BODY
(REF)
21
MATCH DRILL 9/32-INCH
(FOUR PLACES FROM INSIDE)
Figure 2-13.
C-Partition Isolator Brackets Removal (4 Door Only)
2-16
Back to Top
