TB-9-2510-251-24
TECHNICAL BULLETIN
INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)
JULY 2005
TB-9-2510-251-24 - Page 91 of 212
TB 9-2510-251-24
2-19
5.
Remove support plates as follows (see figure 2-16).
a.
Remove capscrew (4), two washers (5), and locknut (8).
Discard locknut (8).
b.
Remove four capscrews (2), eight washers (3), and four locknuts (7) securing retractor mounting bracket
(1) and C-partition support mount (6).
Remove C-partition support mount (6).
Discard four locknuts (7).
c.
Repeat steps a. and b. for opposite of vehicle.
3
7
1
2
3
3
2
LEFT REAR
WHEEL
HOUSE
(REF)
3
7
LEFT SIDE SHOWN,
RIGHT SIDE OPPOSITE
6
4
5
8
5
Figure 2-16.
Support Plates Removal (4 Door Only)
Back to Top
