TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 233 of 704

0021-9

Change 1

TB 9-3950-253-13&P

0021

PLS STOWAGE ASSEMBLY REMOVAL – CONTINUED

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use

assistance during procedure. Ensure any lifting device used is in good condition and of

suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to

follow this warning may result in injury or death to personnel.

NOTE

Stowage assembly weighs 640 lb (290 kg).

6. Attach lifting device and sling to stowage assembly.

7. Use lifting device to remove stowage assembly from vehicle and lower onto flat surface.

8. Remove sling and lifting device from stowage assembly.

9. Remove four locknuts (Figure 7, Item 3), washers (Figure 7, Item 4), bolts (Figure 7, Item 2), and two spacers

(Figure 7, Item 5) from stowage assembly (Figure 7, Item 1). Discard locknuts.

Figure 7.

PLS Spacers.

0021

END OF TASK