TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 241 of 704

0021-17

Change 1

TB 9-3950-253-13&P

0021

HEMTT STOWAGE ASSEMBLY INSTALLATION

00021

WARNING

Provide adequate support and use assistance during procedure. Ensure any lifting device

used is in good condition and of suitable load capacity. Keep clear of heavy parts

supported only by lifting device. Failure to follow this warning may result in injury or death

to personnel.

CAUTION

Verify that all hoses are positioned out of the way of stowage assembly. Failure to follow

this caution may result in damage to equipment.

NOTE

•

Stowage assembly weighs 640 lb (290 kg).

•

Hand tighten bolts on installation.

1. Attach lifting device and sling to stowage assembly.

2. Use lifting device to install stowage assembly on vehicle.

3. Install 12 washers (Figure 18, Item 2), bolts (Figure 18, Item 1), washers (Figure 18, Item 3), and nuts (Figure

18, Item 4) on left and right stowage assembly brackets (Figure 18, Item 5).

4. Remove sling and lifting device from stowage assembly.

Figure 18.

HEMTT Stowage Assembly Bracket.

0021

1,2,3,4

4