TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 249 of 704
0022-1
0022
TB 9-3950-253-13&P
FIELD MAINTENANCE
-
STOWAGE LATCH AND ACTUATOR REPLACEMENT
Removal, Cleaning and Inspection, Installation
REMOVAL
00022
WARNING
•
During these procedures, the operator will be required to climb on and around the vehicle.
Be sure to wear suitable footwear and that no surfaces are slippery. Wear suitable gloves
and hard hat.
•
Use extreme caution when removing pneumatic hoses. Wear protective goggles or face
shield.
•
Failure to follow these warnings may result in injury or death to personnel.
NOTE
Note position of actuator to aid in installation.
INITIAL SETUP
Tools and Special Tools
0
Tool Kit, General Mechanic’s (WP 0057, Item
2)
0
Tool Set, SATS Base (WP 0057, Item 3)
0
Materials/Parts
0
Rag, Wiping (WP 0060, Item 10)
0
Locknut (WP 0059, Item 12) (2)
0
References
0
WP 0020
0
Equipment Condition
0
Vehicle parked on level ground, in neutral gear
with parking brake applied (PLS: TM 9-
2320-364-14&P, HEMTT: TM 9-2320-326-
14&P)
0
Lift frame placed on level ground (WP 0007)
0
Air system pressure relieved (PLS: TM 9-
2320-364-14&P, HEMTT: TM 9-2320-326-
14&P)
0
4
Back to Top
