TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 239 of 704

0021-15

Change 1

TB 9-3950-253-13&P

0021

PLS STOWAGE ASSEMBLY INSTALLATION – CONTINUED

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use

assistance during procedure. Ensure any lifting device is in good condition and of suitable

load capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow

this warning may result in injury or death to personnel.

NOTE

•

Stowage assembly weighs 640 lb (290 kg).

•

Hand tighten bolts on installation.

2. Attach sling and lifting device to stowage assembly.

3. Use lifting device to install stowage assembly on vehicle.

4. Install 12 washers (Figure 16, Item 2), bolts (Figure 16, Item 1), washers (Figure 16, Item 5), and nuts (Figure

16, Item 4) on right and left stowage assembly brackets (Figure 16, Item 5).

5. Remove sling and lifting device from stowage assembly.

Figure 16.

PLS Stowage Assembly Installation.

0021

467-214

5

1,2,3,4