TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 236 of 704
TB 9-3950-253-13&P
Change 1
0021-12
0021
PLS BRACKET REMOVAL
00021
NOTE
•
Note placement of bolts to aid in installation.
•
Bracket removal is the same for both sides.
1. Remove seven nuts (Figure 11, Item 1), bolts (Figure 11, Item 2), and PLS bracket (Figure 11, Item 3) from
vehicle.
2. If damaged, loosen nut (
Figure 11, Item 4) and bolt (Figure 11, Item 5) and remove shim (Figure 11, Item 6)
from vehicle.
Figure 11.
PLS Bracket Removal.
0021
END OF TASK
CLEANING AND INSPECTION
00021
Clean and inspect all parts IAW WP 0020,
General Maintenance Instructions
.
END OF TASK
PLS BRACKET INSTALLATION
00021
NOTE
•
Install bolts as noted during removal.
•
Bracket installation is the same for both sides.
•
Hand tighten bracket bolts on installation.
1. If removed, install shim (
Figure 11, Item 6) and tighten bolt (Figure 11, Item 5) and nut (Figure 11, Item 4) on
vehicle.
2. Install PLS bracket (Figure 11, Item 3), seven bolts (Figure 11, Item 1), and nuts (Figure 11, Item 2) on vehicle.
END OF TASK
Back to Top
