TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 449 of 704

0048-1

Change 1

TB 9-3950-253-13&P

0048

FIELD MAINTENANCE

-

STOWAGE GUIDE POSITION CALIBRATION

INTRODUCTION

00048

This procedure calibrates the stopping positions of the stowage guide for stowing and unstowing the lift frame

during AUTO mode operation. The third (fully extended) position is calibrated first, followed by the second posi-

tion, then the first position.

INITIAL SETUP

Tools and Special Tools

0

Tool Kit, General Mechanic’s

(WP 0057, Item 2)

0

Tool Set, SATS Base (WP 0057, Item 3)

0

Personnel Required

0

Two

0

References

0

WP 0020

0

Equipment Condition

0

Vehicle parked on level ground, in neutral gear

with parking brake applied (PLS: TM 9-

2320-364-14&P, HEMTT: TM 9-2320-326-

14&P)

0

Lift frame in stowed position (WP 0007)

0

Stowage control panel toggle switch set to

OFF position (WP 0004)

0

10