TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 446 of 704

TB 9-350-253-13&P

0047-2

0047

REMOVAL

00047

NOTE

Perform steps 1 through 3 for both right and left sides.

1. Remove locknut (Figure 1, Item 3), bolt (Figure 1, Item 10), washer (Figure 1, Item 11), and chain (Figure 1,

Item 8) from stand (Figure 1, Item 1). Discard locknut.

WARNING

Component will fall when attaching hardware is removed. Support component while

removing attaching hardware. Failure to follow this warning may result in injury to

personnel.

2. Remove locking pin (Figure 1, Item 9) with attached chain (Figure 1, Item 8) from lift frame (Figure 1, Item 2).

3. Remove locknut (Figure 1, Item 4), washer (Figure 1, Item 5), bolt (Figure 1, Item 7), washer (Figure 1, Item 6),

and stand (Figure 1, Item 1) from lift frame (Figure 1, Item 2). Discard locknut.

Figure 1.

Stand.

0047

END OF TASK

CLEANING AND INSPECTION

00047

Clean and inspect all parts IAW WP 0020,

General Maintenance Instructions

.

END OF TASK

2

1

11

10

9

8

7

6

5

4

3