TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 447 of 704

0047-3/(4 Blank)

0047

TB 9-350-253-13&P

INSTALLATION

00047

WARNING

Component will fall when attaching hardware is removed. Support component while

installing attaching hardware. Failure to follow this warning may result in injury to

personnel.

1. Install stand (Figure 1, Item 1), washer (Figure 1, Item 6), bolt (Figure 1, Item 7), washer (Figure 1, Item 5), and

new locknut (Figure 1, Item 4) on lift frame (Figure 1, Item 2). Verify that stand tilts after tightening bolt.

2. Place stand in upright position and install locking pin (Figure 1, Item 9) with attached chain (Figure 1, Item 8) in

lift frame (Figure 1, Item 2).

3. Install chain (Figure 1, Item 8), washer (Figure 1, Item 11), bolt (Figure 1, Item 12), and new locknut (Figure 1,

Item 3) on stand (Figure 1, Item 1).

END OF TASK

END OF WORK PACKAGE