TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

  TB-9-3950-253-13-P - Page 461 of 704

0048.1-3
Change 1
TB 9-3950-253-13&P
0048.1
PREPARATION – CONTINUED
WARNING
During these procedures, the operator will be required to climb on and around the vehicle.
Be sure to wear suitable footwear and ensure no surfaces are slippery. Wear suitable
gloves and hard hat. Failure to follow this warning may result in injury or death to
personnel.
7. Remove snap pin (Figure 2, Item 2) from locking bar (Figure 2, Item 3).
8. Remove locking bar (Figure 2, Item 3) and bail bar lock (Figure 2, Item 4) from lift frame (Figure 2, Item 1).
Figure 2.
Bail Bar Lock Stowed on Lift Frame.
048
9. Store bail bar lock in storage compartment of vehicle.
END OF TASK


Back to Top