TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 465 of 704
0048.1-7
Change 1
TB 9-3950-253-13&P
0048.1
CONVERT TO SHIPMENT CONFIGURATION – CONTINUED
WARNING
Latch support beam will fall toward the right side of the vehicle when locking pin is
removed. Support latch support beam during removal of locking pin. Failure to follow this
warning may result in injury or death to personnel.
13. Remove clip pin (Figure 7, Item 1) from locking pin (Figure 7, Item 3).
14. Remove locking pin (Figure 7, Item 3) from latch support bracket (Figure 7, Item 4) and lower latch support
beam to horizontal position (Figure 7, Item 2).
15. Install locking pin (Figure 7, Item 3) in upper position on latch support bracket (Figure 7, Item 4).
16. Install clip pin (Figure 7, Item 1) in locking pin (Figure 7, Item 3).
Figure 7.
Lower Latch Support Beam.
048
4
1
2
3
1
2
3
Back to Top
