TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 472 of 704

TB 9-3950-253-13&P

Change 1

0048.1-14

0048.1

CONVERT TO STANDARD CONFIGURATION – CONTINUED

WARNING

During these procedures, the operator will be required to climb on and around the vehicle.

Be sure to wear suitable footwear and ensure no surfaces are slippery. Wear suitable

gloves and hard hat. Failure to follow this warning may result in injury or death to

personnel.

18. Retrieve bail bar lock from storage compartment of vehicle.

19. Install bail bar lock (Figure 15, Item 4) and locking bar (Figure 15, Item 3), on lift frame (Figure 15, Item 1).

20. Install snap pin (Figure 15, Item 2) in locking bar (Figure 15, Item 3).

Figure 15.

Bail Bar Lock Stowed on Lift Frame.

048