TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 468 of 704
TB 9-3950-253-13&P
Change 1
0048.1-10
0048.1
CONVERT TO STANDARD CONFIGURATION – CONTINUED
WARNING
During these procedures, the operator will be required to climb on and around the vehicle.
Be sure to wear suitable footwear and ensure no surfaces are slippery. Wear suitable
gloves and hard hat. Failure to follow this warning may result in injury to personnel.
5. Remove clip pin (Figure 10, Item 1) from locking pin (Figure 10, Item 3).
6. Remove locking pin (Figure 10, Item 3) from upper position on latch support bracket (Figure 10, Item 4).
7. Raise latch support beam (Figure 10, Item 2) to vertical position and install locking pin (Figure 10, Item 3) in
latch support bracket (Figure 10, Item 4).
8. Install clip pin (Figure 10, Item 1) in locking pin (Figure 10, Item 3).
Figure 10.
Raise Latch Support Beam.
048
4
1
2
3
1
2
3
Back to Top
