TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 474 of 704

TB 9-3950-253-13&P

Change 1

0048.1-16

0048.1

CONVERT TO STANDARD CONFIGURATION – CONTINUED

WARNING

•

Lifting cables, chains, hooks, and slings used for lifting must be in good condition and of

suitable capacity.

•

Improper use of lifting equipment and improper attachment of cables may cause injury to

personnel and damage to equipment. Observe all standard rules of safety.

•

Use extreme caution when handling heavy parts. Provide adequate support and use

assistance during procedure. Ensure any lifting device used is in good condition and of

suitable load capacity. Keep clear of heavy parts supported only by lifting device.

•

Failure to follow these warnings may result in injury or death to personnel.

NOTE

Hook arm weighs 200 lb (91 kg).

25. Attach sling and lifting device to hook arm (Figure 17, Item 1).

26. Remove locking pin (Figure 17, Item 4) and hook arm pin (Figure 17, Item 2) from hook arm base

(Figure 17, Item 3).

27. Use lifting device to raise hook arm (Figure 17, Item 1) until aligned with hook arm base (Figure 17, Item 3).

28. Install hook arm pin (Figure 17, Item 2) and locking pin (Figure 17, Item 4) in hook arm base

(Figure 17, Item 3).

29. Remove lifting device and sling from hook arm (Figure 17, Item 1).