TM-1-1500-344-23-4
CONSUMABLE MATERIALS AND EQUIPMENT FOR AIRCRAFT AND AVIONICS VOLUME IV
TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL
SEPTEMBER 2013
TM-1-1500-344-23-4 - Page 20 of 92
2-12
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
01 September 2013
Table 2-5. Corrosion Preventive Compounds (Cont.)
Nomenclature
Specifcation/
Part No.
National Stock
Number
Unit of
Issue
Intended Use
Usable
On
AC
AV
Lubricating
Oil, General
Purpose,
Preservative
(Water
Displacing, Low
Temperature)
MIL-PRF-32033
(supersedes VV-L-800)
CN (4 OZ)
CN (16 OZ Aerosol)
PT (Spray Bottle)
QT
GL
CN (5 GL)
DR (55 GL)
The oil can be applied by dipping,
brushing, or spraying for lubrication
and short term protection of parts
against corrosion.
X
X
Lubricant,
Cleaner, and
Preservative
for Weapons
and Weapons
Systems
MIL-PRF-63460
BT (4 OZ)
PT (Spray Bottle)
QT (Spray Bottle)
GL
Lubrication and short term
preservation of aircraft hinges, and
small and large caliber weapons.
NOTE: Do not use MIL-PRF-63460 on
rubber or other elastomeric materials.
Use only in areas from which solvents
can evaporate. Do not use as a direct
substitute for MIL-PRF-32033.
X
X
Corrosion
Preventive
Compound,
Petrolatum, Hot
Application
MIL-C-11796
Class 1
(Hard Flm compound)
Class 1A
(Hard Flm, non-slick)
Class 3
(Soft Flm compound)
CN (5 LB)
CN (35 LB)
CN (35 LB)
DR (400 LB)
PT
CN (5 LB)
CN (35 LB)
Preservation of interior surfaces
of structural aluminum alloy tubing
assemblies.
X
Linseed Oil,
Boiled
ASTM D260
(supersedes A-A-371)
GL
CN (5 GL)
Preservation of interior surfaces
of structural carbon steel tubing
assemblies.
X
Back to Top
