TM-1-1500-344-23-4
CONSUMABLE MATERIALS AND EQUIPMENT FOR AIRCRAFT AND AVIONICS VOLUME IV
TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL
SEPTEMBER 2013
TM-1-1500-344-23-4 - Page 16 of 92
2-8
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
01 September 2013
Table 2-3. Cleaning Compounds (Cont.)
Nomenclature
Specifcation/
Part No.
National Stock
Number
Unit of
Issue
Intended Use
Usable
On
AC AV
Metal Polish,
Aluminum
A-A-59318
(supersedes MIL-P-6888)
Type I (Liquid)
Type II (Paste)
QT
GL
QT
GL
Polishing unpainted aluminum aircraft
surfaces. The abrasive quality of the
polish enables it to remove tarnish and
produce a high lasting shine. The polish
shall not be used on aluminum aircraft
surfaces that are to be painted.
X
Plastic Polish
P-P-560
Type I (Liquid)
DZ
BX (24 EA)
Cleaning and polishing of plastic
materials to remove light scratches,
and surface prep for application of an
anti-static flm which will prevent the
electrostatic attraction of dust, lint, ash,
etc. to the acrylic plastic.
X
Cleaning and
Cleaning-
Lubricating
Compounds,
Electrical Contact
MIL-PRF-29608
Class C
Ecolink 3005
(VOC exempt)
Class L
HFE-7100 (VOC exempt)
BX (12 EA)
BX (12 EA)
BX (6 EA)
Used for the cleaning of electrical
contacts and switches.
It is intended
for the removal of aircraft avionics soils,
salt, dielectric Fuid and hydraulic Fuid.
Class C is used for cleaning electrical
contacts.
Class L is used for cleaning and
lubrication o± switches.
X
Tape and
Residue
Remover (TaRR)
3M P/N 35975
PT
For removing neoprene rubber or
polyurethane protective tapes and tape
adhesive residue.
CAUTION
Unless otherwise directed, do not allow
TaRR to dwell on painted sur±aces ±or
longer than one hour. Softening of paint
may occur.
X
Back to Top
