TM-1-1500-344-23-4
CONSUMABLE MATERIALS AND EQUIPMENT FOR AIRCRAFT AND AVIONICS VOLUME IV
TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL
SEPTEMBER 2013
TM-1-1500-344-23-4 - Page 23 of 92
2-15
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
01 September 2013
Table 2-7. Lubricants (Cont.)
Nomenclature
Specifcation/
Part No.
National Stock
Number
Unit of
Issue
Intended Use
Usable
On
AC AV
Grease, Aircraft,
Helicopter
Oscillating Bearing,
NATO Code G-366
MIL-G-25537
CA (14 OZ)
CN (1.75 LB)
CN (6.5 LB)
CN (35 LB)
Lubrication of bearings having oscillating
motion of small amplitude.
X
Grease, Aircraft, Ball
and Roller Bearing,
NATO Code G-372
MIL-G-25013
TU (8 OZ)
CA (14 OZ)
CN (1.75 LB)
CN (35 LB)
Ball and roller bearing lubrication. It
may be used on aircraft actuators,
gear boxes, and similar equipment
when authorized by the applicable
maintenance manual.
X
Lubricant,
Molybdenum
Disulfde Silicone,
NATO Code S-1735
DOD-L-25681
LB (1 LB)
Lubricant For use on slow-speed sliding
surfaces subject to high temperatures
in aircraft gas turbine engines (up to
400°C) and as an antiseize compound
on threaded parts (up to 760°C).
X
Lubricant, Solid
Film, Heat Cured,
Corrosion Inhibiting
SAE AS5272
(supercedes MIL-L-46010
Types I and II)
Type I
Type II
PT
GL
QT
GL
Lubricant For use to reduce wear and
prevent galling, corrosion, and seizure
of metals. Ideal for sliding motion
applications such as plain and spherical
bearings, ±ap tracks, hinges, thread, and
cam surFaces.It is also useFul where a
solvent-resistant coating is required, and
where long-term corrosion protection is
needed under static conditions.
X
Lubricant, Solid
Film, Heat Cured,
Corrosion Inhibiting
(Low VOC < 250 g/l)
MIL-PRF-46010
(supercedes MIL-L-46010
Type III)
Color 1 (Natural)
Color 2 (Black)
GL
GL
²or use when a low VOC solid flm
lubricant is required. Before using MIL-
PRF-46010 in lieu of AS5272 Types I and
II, engineering authorization is required.
X
Lubricant, Solid Film,
Air Cured, Corrosion
Inhibiting,
NATO Code S-749
MIL-L-23398
Type I (Bulk)
Type II (Aerosol)
QT
CN (16 OZ)
Lubricant for use on steel, titanium,
or aluminum bearing surFaces where
moderate wear liFe and corrosion
protection is desired. It is suitable for
sliding motion applications such as in
plain spherical bearings, ±ap tracks,
hinges and cam surfaces.
X
Damping Fluid,
Silicone Base
VV-D-1078
Grade 100 CST
Grade 100,000 CST
LB
DR (55 GL)
LB
Lubricant For use on small switches and
potentiometers where a residual lubricant
is required after cleaning.
X
Hydraulic Fluid, Fire
Resistant, Synthetic
Hydrocarbon Base
NATO Code H-537
MIL-PRF-83282
QT
GL (1 GL)
DR (10 GL)
DR (55 GL)
May be used as a cleaner on steel
surfaces. Contains additives to provide
anti-wear characteristics and inhibit
oxidation and corrosion. Use for
wiping struts and surFaces oF hydraulic
components.
X
Petrolatum, Technical VV-P-236
TU (8 OZ)
CN (1.75 LB)
CN (7.5 LB)
Light lubricating grease that can be
used as a release agent for sealant
applications.
X
Back to Top
