TM-10-5411-233-13-P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

SEPTEMBER 2002

TM-10-5411-233-13-P - Page 162 of 356

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER

0016 00

UNIT MAINTENANCE

0016 00-6

Step 7.

Using a Letter “Q” size drill bit, drill out the two marked holes. Drill only through the inside surface

of the tailgate. Do not drill completely through the opposite side of the tailgate. Remove any burrs.

Step 8.

Install a 1/4-20 blind Rivnut in each of the two mounting holes using a Rivnut installation tool

included with the mounting kit. Complete instructions for Rivnut installation can be found in WP 0013.

Step 9.

Once all Rivnuts have been installed, mount the bracket to the tailgate using 1/4-20 x .75 inch

long hex head screws and 1/4 inch lockwashers. Tighten all hardware securely.

Step 10.

With the tailgate in a horizontal position, attach the ladder to the installed first bracket.

Installed first

bracket

Ladder