TM-5-2330-325-13-P
SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-2330-325-13-P - Page 17 of 648
WARNING SUMMARY - Continued
GENERAL HAZARDOUS MATERIALS WARNING DESCRIPTION - Continued
WARNING
•
The hydraulic system operates under extremely high pressure. Before
disconnecting the hydraulic inlet and outlet lines check the hydraulic gage to
ensure there is no pressure in the lines. Failure to comply may result in death or
injury to personnel. Seek medical attention in the event of an injury.
•
High pressure hydraulics used to operate equipment can pierce body tissue. Never
disconnect any hydraulic line or fitting without first dropping pressure to zero.
Failure to comply may result in death or injury to personnel. Seek medical attention
in the event of an injury.
•
DO NOT exceed 1,100 psi (7,584.2 kPa) to avoid over pressurizing the hydraulic
system on the semitrailer. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
WARNING
•
Chemical Agent Resistant Coating (CARC) paint debris may be considered
environmentally hazardous during removal. Consult local procedures prior to
removal of CARC paint to ensure compliance with local laws. Failure to comply
may result in death or injury to personnel. Seek medical attention in the event of
an injury.
•
Accidental or intentional introduction of liquid contaminants into the environment is
a violation of state, federal, and military regulations. Refer to Army Petroleum, Oils,
and Lubricants (POL) for information concerning storage, use, and disposal of
these liquids. Failure to comply may cause damage to environment and health of
personnel. Failure to comply may result in death or injury to personnel. Seek
medical attention in the event of an injury.
TM 5-2330-325-13&P
o
Back to Top
