TM-5-2350-262-20-1

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 1 OF 3

TM-5-2350-262-20-1 - Page 557 of 776

TM 5-2350-262-20-1

4-210.2

Change 4

F

Remove stamped nut (10) and nut (11) from re-

ducer (9).

G

Remove roll pin (12) from pivot (13) and remove

actuator arm (2) from pivot (13) and base plate

(14).

H

Remove cable sheath (8) from straight adapter

(15).

I

Remove elbow (15) from base plate (14).

J

Pull wire rope (7) though nut (5), reducer (9),

nut (11), stamped nut (10), cable sheath (8), el-

bow (15), base plate (14), and actuator arm (2).

WARNING

Do

not

breathe

fire

extinguisher vapors.

Failure

to comply may result in injury

to personnel.

A

Remove cotter pin (1) from actuator arm (2).

B

Cut and remove antipilferage seal (3) and pull

fire extinguisher handle (4) outward from hull.

Discard antipilferage seal (3).

C

Remove nut (5) from fire extinguisher handle (4)

and pull wedge (6) and wire rope (7) free of nut

(5).

D

Remove wedge (6) from wire rope (7).

E

Remove cable sheath (8) from reducer (9).

Note

To remove wire rope it is necessary to re-

move the fire extinguisher handle nut and

wedge.

Note

Notice the routing of the wire rope to facilitate

reassembly.

REMOVAL (LEFT SIDE)