TM-5-2350-262-20-1

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 1 OF 3

TM-5-2350-262-20-1 - Page 564 of 776

TM 5-2350-262-20-1

Change 4

4-212.3

F

Loosen two nuts (18) on clamps (19) and re-

move fire extinguisher cylinder (13) from clamps.

G

Remove two screws (14), self-locking nuts (15),

fire bottle adapter (16) and flange (17) from fire

extinguisher cylinder (13).

Discard self-locking

nuts (15).

H

Remove four cotter pins (20), straight pins (21),

and two clamps (19) from brackets (22).

Dis-

card cotter pins (20).

I

Remove two nuts (18) from clamps (19).

INSTALLATION

Note

Do not tighten nuts on clamps until fire

extinguisher cylinder is positioned.

A

Install two clamps (19) on brackets (22) with four

straight pins (21) and new cotter pins (20).

B

Connect clamps (19) with two nuts (18).

Do not

tighten nuts (18).

C

Install fire bottle adapter (16) and flange (17) with

two screws (14) and new self-locking nuts (15).

D

Position fire extinguisher cylinder (13) between

clamps (19) and tighten with two nuts (18).