TM-5-2350-262-20-1

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 1 OF 3

TM-5-2350-262-20-1 - Page 563 of 776

TM 5-2350-262-20-1

4-212.2

Change 4

C

Install appropriate sized cotter pin (8) through

hole in actuator assembly (9) to secure actuator

lever to prevent accidental discharge of fire ex-

tinguisher.

D

Remove two screws (10) and self-locking nuts

(11) from actuator bracket (12).

Discard self-

locking nuts (11).

E

Remove actuator and bracket assembly (12)

from fire extinguisher cylinder (13).

REMOVAL

WARNING

Do

not

breathe

fire

extinguisher vapors.

Failure

to comply may result in injury

to personnel.

CAUTION

Ensure cotter pin is installed

in fire extinguisher actuator

assembly to avoid accidental

discharge.

Failure to comply

may result in iinjury to

personnel.

Note

Both Left and Right side fire extinguisher

cylinders are removed the same way.

The

driver’s side is shown for clarity.

A

Remove two hose assemblies (1) from tube tee

(2).

B

Remove four screws (3), washers (4) and

lockwashers (5) and remove actuator cover (6)

from actuator assembly (7).

Discard lockwashers

(5).