TM-5-2350-262-20-2

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 2 OF 3

TM-5-2350-262-20-2 - Page 557 of 670

TM 5-2350-262-20-2

NOTE

Step 4 below applies to above illustration.

4. For vehicles equipped with MCS preparation kit only, remove screw (1), washer (2), and MCS prep

spacer plate (4) from the upper left rear corner of driver’s compartment and the angle plate (3) from the

left front side of the radio box case. Discard MCS prep spacer plate, angle plate, and attaching hardware.

NOTE

Steps 5 and 6 below apply to illustration above.

5. Slide the assembled coolant umbilical (2), MCU end

through the MCS preparation hole (1) at the

upper left rear corner of the driver’s compartment and toward the rear of vehicle with the MCU wiring

harness (3) and assembled grommet (4) and grommet plate (5).

6. Fasten the grommet plate (5) (with the angled corner in the upper left rear corner of compartment) to the

rear wall of the driver’s compartment (6) using two lock washers (MS35335-33) (7) and pan head

machine screws (MS35206-281) (8).

4-963.5

Change 4