TM-5-2350-262-20-2

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 2 OF 3

TM-5-2350-262-20-2 - Page 559 of 670

TM 5-2350-262-20-2

C.

Circuit

Breaker

Installation

in

Driver’s Compartment:

NOTE

Steps 1 and 2 below apply to above illustration.

1. Remove two machine bolts (3) and bracket assembly (2) from sidewall. Retain machine bolts and bracket

assembly for later use.

2.

Remove two machine screws (1), lock washers (5), nuts (6), and circuit breaker (4) from bracket assembly

(2).

Discard machine screws and lock washers.

Retain nuts and circuit breaker for later use.

4-963.7

Change 4

NOTE

Steps 3 and 4 below apply to illustration on next page.

3.

Install circuit breaker (M13516/1-1) (1) on top surface of existing bracket assembly (3) with circuit breaker

(7), retained from step C.2.

above, in its original position using two lock washers (MS35338-42) (4) and

longer pan head machine screws (MS35206-250) (5) with the nuts (6) retained from step D.2.

above.

4.

Reinstall bracket assembly (3) on sidewall with the two machine bolts (2) retained in step D.1. above.