TM 5-2350-262-20-2
Change 4
4-963.12
WARNING
CARC paint is extremely toxic.
It can irritate skin and cause burns.
Avoid inhaling.
Use
only with adequate
ventilation. Avoid contact with skin, eyes,
or
clothing.
In case of contact,
immediately Fush skin or eyes with water for at least 15 minutes. Get medical attention for
eyes.
±ailure to comply may result in injury to personnel.
NOTE
Steps 6 through 8 apply to above illustration.
6.
Remove cap screw (1) and fat washer (3) From the MCU base plate (4).
Retain cap screw and fat washer
For later use.
7.
Clean painted surFace around hole (5) in MCU base plate (4).
8.
Install the ground wire (6) From the MCU wiring harness to the MCU base plate (4) using the cap screw (1)
and fat washer (3) From step ±.6 above adn with star washer (MS35335-35) (2), ensuring the attaching
surFace on the MCU base plate is bare and unpainted.