TM-5-2350-262-20-2

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 2 OF 3

TM-5-2350-262-20-2 - Page 561 of 670

TM 5-2350-262-20-2

4-963.9

Change 4

NOTE

Step 3 applies to above illustration.

3.

Continue routing the MCU Power Lead (1249161-2) (2) forward, behind the instrument panels and out

the lower front hole (1) of the driver’s compartment.

NOTE

Step 4 below applies to above illustration.

4.

Route the MCU Power Lead (12491611-2) (2) along the existing wire harness (3).

Use 5 or 6 Electrical

Tie Straps (MS3367-2-0) (4) to connect the MCU Power Lead (12491611-2) (2) to the existing Wiring

Harness (3) on the front and right outside of the driver’s compartment.

Connect the MCU Power Lead

(12491611-2) (2) end to the end of the MCU Power Lead (12491611-1) (1) on the right outside of the

driver’s compartment inside the engine compartment.