TM-5-2350-262-20-2

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 2 OF 3

TM-5-2350-262-20-2 - Page 560 of 670

TM 5-2350-262-20-2

Change 4

4-963.8

D.

CCS

Power

Lead

and

MCU

Power

Lead

Installation and CCS

Power

Lead

Routing:

NOTE

Steps 1 and 2 below apply to above illustration.

1.

Connect positive lead (2) of MCU wiring harness (12491610) to left side of circuit breaker (4).

2.

Connect MCU Power Lead (12491611-2) (3) to right side of circuit breaker (4).

Route the opposite end

of the MCU Power Lead (3) up through the wire loop clamp (1) and toward the left front of the driver’s

compartment through the second wire loop clamp on the upper left sidewall of the driver’s compartment.