TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 164 of 335

TM 5-2350-377-14&P

DISASSEMBLY

REMOVAL (LEFT SIDE)

WARNING

High pressure is present in the M9 hydraulic system. Do not disconnect any hydraulic

system component unless hydraulic system pressure has been relieved. Ensure each

of the hydraulic control levers is moved several times through all positions, and the

hydraulic tank dipstick is slowly loosened to relieve pressure. Failure to comply may

result in severe injury to personnel.

CAUTION

Cap or plug all port and ends of hoses and tubes to prevent contamination of hydraulic oil. Failure

to comply may result in damage to equipment.

NOTE

Removal procedures for right side manifold, reference TM 5-2350-262-20-2, Hydraulic Intermediate

Manifolds and Fittings Replacement, Removal (Right Side).

Procedures below are for left side

only.

Use two wrenches when disconnecting hydraulic lines from fittings.

Tag all hoses and tubes prior to removal, for installation.

HYDRAULIC INTERMEDIATE MANIFOLD AND FITTINGS REPLACEMENT

0026 00

0026 00-1

INITIAL SETUP

Tools/Test Equipment

Tool kit, general mechanic's

(Item 6, WP 0056 00)

Wrench set, crowfoot

(Item 7, WP 0056 00)

Materials/Parts:

Caps and plugs (Item 6, WP 0055 00)

Lubricating oil (Item 14, WP 0055 00)

Tiedown strap(s) (Item 18, WP 0055 00)

Equipment Conditions

Ejector forward (TM 5-2350-262-10)

Hydraulic pressure relieved (TM 5-2350-262-20-1)

Hull access covers removed

(TM 5-2350-262-20-1)

Lockwasher (Item 19, WP 0026 00, Figure 20)

Packing (Item 31, WP 0026 00, Figure 21)

Self locking screw (Item 40, WP 0026 00, Figure 21)