TM 5-2350-377-14&P
HYDRAULIC INTERMEDIATE MANIFOLD AND FITTINGS REPLACEMENT - continued
3. Install five new packings (item 31) on four adapters (item 33) , and install adapters (item 33) and elbow
(item 32)
on front of manifold ( item 16).
4. Install seven new packings ( item 24) on seven adapters (item 25), and install adapters on top of manifold (item 16).
NOTE
Steps 5 through 18 apply to Figure 57.
5. Install left bracket (item 41) on manifold (item 16) with two washers (item 29) and new self locking screws ( item 28).
Figure 57. Manifold Tubes.
6. Install right side bracket (item 41) on manifold (item 16) with two washers (item 39) and new self locking screws
( item 40).
7. Install manifold (item 16) on hull with two washers (item 27) and new self locking screws (item 26). Do not tighten
self locking screws.
8. Connect five tubes (item 14) to four adapters ( item 33) and elbow (item 32) at front of manifold ( item 16).
9. Connect five tubes (item 36) to five adapters (item 35) at bottom of manifold (item 16).
10. Connect four tubes (item 43) to tee (item 5) and fitting (item 21).
11. Connect hose (item 42) to adapter (item 3) at rear of manifold ( item 16).
0026 00-6
0026 00