TM 5-2350-377-14&P
TRACK AND BLADE CONTROL BOX REPAIR - continued
NOTE
Steps 2 through 5 apply to Figure 99.
2. Refer to WP 0034 00 to install control box wiring harness.
3. Install control box power harness connector (item 1) to control box (item 2).
Figure 99.
Control Box.
4. Install manifold harness connector (item 3) to track and blade control box (item 2).
5. Slide track and blade control box (item 2) behind instrument panel (item
6) and install two screws (item
4) and flat
washers (item 5) on instrument panel (item 6).
END OF WORK PACKAGE
0037 00-3/4 blank
0037 00
3
2
1
6
4
5