TM-5-2350-378-24-P

HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

TM-5-2350-378-24-P - Page 544 of 790

TM 5--2350--378--24&P

0026 00--3

REPLACE HDC DISCONNECT BRACKET -- Continued

0026 00

REMOVAL -- CONTINUED

5.

Disconnect circuit 10 (Figure 2, item 8) and circuit 1070 (Figure 2, item 5) connectors from HDC circuit

breaker (Figure 2, item 11).

6.

Remove two nuts (Figure 2, item 9), two lockwashers (Figure 2, item 10), two screws (Figure 2, item 12), and

HDC circuit breaker (Figure 2, item 11) from HDC disconnect bracket (Figure 2, item 17). Discard

lockwashers.

7.

Remove two self--locking screws (Figure 2, item 6), two flat washers (Figure 2, item 7), and disconnect

bracket (Figure 2, item 17) from bulkhead. Discard self--locking screws.

Figure 2. Install HDC Disconnect Bracket

END OF TASK