TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 550 of 790
TM 5--2350--378--24&P
REPLACE HDC CIRCUIT BREAKER AND POWER DISTRIBUTION COMPONENTS --
Continued
0027 00
INSTALLATION -- CONTINUED
3.
Install HDC circuit breaker (Figure 4, item 7) with two screws (Figure 4, item 8), two new lockwashers
(Figure 4, item 6), and to nuts (Figure 4, item 5) to HDC disconnect bracket (Figure 4, item 9).
4.
Connect circuit 1070 (Figure 4, item 3) and circuit 10 (Figure 4, item 4) connectors to HDC circuit breaker
(Figure 4, item 7).
5.
Install disconnect bracket (Figure 4, item 9) on bulkhead with two flat washers (Figure 4, item 1) and two
self--locking screws (Figure 4, item 2).
Figure 4. Installing HDC Circuit Breaker
END OF TASK
END OF WORK PACKAGE
0027 00--5/6 blank
Back to Top
